howto:using_the_3d_printer:solidoodle3

Solidoodle3

The Solidoodle3 3D printer at MHV was donated by Jarrah 'Sunday' Brouwer on 23 August 2014. It needs a bit of diagnosis and hacking to get the extruder working (and possibly to get the print bed height calibrated).

Progress and instructions will appear here once this work has started.

—19/5/2015—

Hello everyone, I am Anthony.

Today, I used the Solidoodle 3 3D printer. I would like to share my experience.

I used the software “Cura” to open my STL file.

Everything worked fine at the beginning except that the heated bed is not heating up. With the help from Brenda and others, we were able to get the heating process working by ticking the box in Machine - Machine Settings - “Heated bed”

Then, it started to print.

  • Clockwise increases current
  • howto/using_the_3d_printer/solidoodle3.txt
  • Last modified: 2016/01/19 21:50
  • (external edit)